Tag Archives: filling

A trip to the luthier

After most of the work was done I took the bass to the well known Dutch luthier Lucas Suringar. He is also selling the new Stagg RDL bass as I mentioned before in this posting. The one thing I did not trust myself with was planing the rosewood fingerboard… As he has a lot of experience with the Stagg EUB I was more than happy to drive quite a bit further to visit him. And it is always fun to chat with him and other customers while waiting for the work to be finished.

WP_20131116_006He took off the strings and removed quite a lot from the fingerboard. The planing revealed some lighter spots on the board but I think this only adds character to it. And after re-oiling the board it was a lot less visible anyhow.

In order to be able to plane the board Lucas removed the top nut. On most Staggs this is glued into place and removing it almost certainly will damage the epoxy on the headstock. As it did on my bass too 😦  But I was able to recover the paint flakes and I have glued them back in place at home and the damage is hardly visible. Strangely enough the top nut on my black Stagg was not glued on at all, something he had not seen before on any of the Staggs he had worked on so far.

The nut itself was also modified. On a stock Stagg the string spacing is not correct (too large). This should be 10 mm heart to heart. So three of the four slots were filled with a mixture of super glue and ebony sawdust and some new slots were cut. A quick re-oiling with some linseed oil finished the job.

After all work was done the Stagg played a lot better. No more buzzing! Top job and also at a very reasonable price (about 30-50% less than other quotes I got)!